Differences

This shows you the differences between two versions of the page.

--- cash_sorting_machine:cm200v:cm200v [2017/04/26 01:56]
root [General Description]
+++ cash_sorting_machine:cm200v:cm200v [2021/01/07 08:53] (current)
angelo_chen [2. RotoCash Security (SECOne)]
@@ Line 1: / Line 1: @@
+{{:atm:h22:logo2.png?200|}}\\
 ===== Hardware Engineer CM200V Level 1 Training Manual =====
@@ Line 6: / Line 8: @@
-<WRAP round box>
 | **Doc. No.    ** | **YT-WCSC(O)** |
 | **Version** | **1.1** |
 | **Issuing date** |**2016** |
-</WRAP>
@@ Line 30: / Line 32: @@
 \\
-<WRAP round box >
 Copyright By **GRG Banking Equipment Co., Ltd.**
 \\
@@ Line 39: / Line 41: @@
 Web : http://www.grgbanking.com\\
 All Rights Reserved
-</WRAP>
-<color #22b14c>**Revision History**</color>
+**Revision History**
-<WRAP center round box >
 | **Version** | ** Issue Date** | **Remark** | **Participant** |
@@ Line 51: / Line 53: @@
 | 1.1 | 2016-12 | Add a new menu Add circuit diagram Add cable and sensor connection Add RCC folder expiation Re-name of cable-sensor connection | Hank |
-</WRAP>
@@ Line 66: / Line 68: @@
 ==== General Safety Precautions ====
-<WRAP round important >
+To ensure the safe operation of the machine, please carefully read the notes on safety provided below as well as the contents of this manual.**GRG Banking will not bear any responsibilities for the damage or injuries** arising from the use of the machine that is not in accordance with the notes and the contents provided below.
-To ensure the safe operation of the machine, please carefully read the notes on safety provided below as well as the contents of this manual. <color #ed1c24>**GRG Banking will not bear any responsibilities for the damage or injuries**</color> arising from the use of the machine that is not in accordance with the notes and the contents provided below.
 **Notes on operation safety**
@@ Line 89: / Line 90: @@
   * Repair work may only be carried out by authorized personnel.
   * Unauthorized opening of the device or repair work carried out improperly could result in considerable danger to the user.
-</WRAP>
@@ Line 135: / Line 136: @@
 The "First Level Maintenance of CM200V" chapter describes the test program & its operation, disassembly & reassembly process and adjustment of CM200V.
 The "Error Diagnosis & Resolution" chapter explains how to diagnose errors using Toolplus and provides an idea of error code messages that may be output, together with explanations and action to be taken.\\
-The "Appendix-1" provides the description of electrical interfaces of all devices within CM200V.\\
+The [[:cash_sorting_machine:cm200v:cm200v#appendix-1_power_supply_technical_specification|Appendix-1]] provides the description of electrical interfaces of all devices within CM200V.\\
-The "Appendix-2" provides the description of the prerequisites for the training.\\
+The [[:cash_sorting_machine:cm200v:cm200v#appendix-2_Training_Prerequisites|Appendix-2]] provides the description of the prerequisites for the training.\\
-The "Appendix-3" provides the user feedback form.\\
+The [[:cash_sorting_machine:cm200v:cm200v#appendix-3_User_Feedback_Form|Appendix-3]] provides the user feedback form.\\
 **Supplementary Documentation**
@@ Line 144: / Line 145: @@
 \\
 Following is the list of manuals that should be read in conjunction with this training manual:
-  - CM200V User Manual
+  - {{ :cash_sorting_machine:cm200v:cm200v_user_manual_v1.0.pdf |CM200V User Manual}}
-  - CM200V Maintenance Manual (Primary)
+  - {{ :cash_sorting_machine:cm200v:cm200v_maintenance_manual_primary_v1.0.pdf |CM200V Maintenance Manual (Primary)}}
-  - CM200V Maintenance Manual (Secondary)
+  - {{ :cash_sorting_machine:cm200v:cm200v_maintenance_manual_secondary_v1.0.pdf |CM200V Maintenance Manual (Secondary)}}
@@ Line 165: / Line 166: @@
 ====== Chapter 1 Hardware Architecture ======
 ===== General Description =====
-**[[http://esupport.grgbanking.com/?g=training&m=Video&a=detailview&id=416|Marketing Introduction video]]**\\
-**[[http://esupport.grgbanking.com/?g=training&m=Video&a=detailview&id=395|Training Introduction video]]**
-\\
 GRG’s CM200V is a banknote sorting machine with cutting-edge banknote detection technology to improve cash processing speed and accuracy. By utilizing CIS (Contact Image Scan) and OCR (Optical Character Recognition) technology, images of both sides of the banknote as well as the serial number can be captured and recorded.
 \\
@@ Line 181: / Line 180: @@
 ===== Features & Characteristics =====
-<WRAP round info >
   - 5" LCD touch screen with clear operation prompts and user guides.
   - Automatic serial number capturing at a speed of 12 notes/ second, the serial number can be recorded in the Embedded PC, and the both sides’ images of each note will be kept in an optional image recorder.
@@ Line 191: / Line 188: @@
   - Automatic serial number (OCR) capturing and recording (Optional)
   - The machine has the following banknote detection technology: Visible light image analysis, Infrared light image analysis, Transmitted light image analysis, Ultraviolet fluorescence analysis, Full length magnetic analysis, Full size thickness detection, Double side contact image scan, Serial number detection.
-</WRAP>
@@ Line 296: / Line 291: @@
 \\
+If you need some more intuitive impression of the CM200V, please refer to the following video:\\
+[[http://esupport.grgbanking.com/?g=training&m=Video&a=detailview&id=416|Marketing Introduction video]]\\
+[[http://esupport.grgbanking.com/?g=training&m=Video&a=detailview&id=395|Training Introduction video]]
 \\
@@ Line 355: / Line 352: @@
   - RotoCash Security (SECOne):GRG Security Software for CM200V
+*If the machine had installed RCC, please uninstall the RCC and delete the RCC folder first.
 ==== 1. RotoCash Controller (RCC) ====
   - Application and Folder Introduction
@@ Line 458: / Line 455: @@
   * Select ”Yes” to transform the format of system disk.
 **Note:**
-\\To guarantee a smooth transformation, which takes a certain time, please do not operate the machine during the transformation. After the transformation is completed, ”Welcome” interface will be shown.
+To guarantee a smooth transformation, which takes a certain time, please do not operate the machine during the transformation. After the transformation is completed, ”Welcome” interface will be shown.
   * On the "Welcome" screen, click "Next".
 {{:cash_sorting_machine:cm200v:image023.jpg?nolink&500|}}
@@ Line 493: / Line 490: @@
 **a) Regedit Checking:** Open "Regedit" and check if the item "HKEY_LOCAL_MACHINE\SYSTEM\SECONE\Config" exists and its "VersionInfo" value is "V1.0.0b2".
-**b) Task Manager checking:** Open the "Task Manager" and check if the following two processes exist:
+**b) Task Manager checking:** Open the "Task Manager" and check if the following two processes exist:\\
+Client Service Process: Autorun.exe \\
-Autorun . exe                  Client Service Process\\
+Service Monitoring Process: ProcServiceMon.exe \\
-ProcServiceMon . exe            Service Monitoring Process\\
-Uninstallation
+**Uninstallation**\\
 There are two ways to uninstall the RotoCash Security software.\\
 a) Using "Add/Remove Programs" from the 'Control Panel"\\
@@ Line 510: / Line 505: @@
 Please be sure to restart the machine after uninstalling RotoCash Security Software.
+*Delete the RCC folder completely.
 **b) Using RotoCash Security uninstallation component**
@@ Line 546: / Line 541: @@
 === Daily Sorting Operation Flow Diagram ===
-{{ :cm200v:diagram01.png?600 |}}
+{{:cash_sorting_machine:cm200v:diagram01.png?600|}}
 === Functional Setting Flow Diagram ===
-{{ :cm200v:diagram02.png?600 |}}
+{{:cash_sorting_machine:cm200v:diagram02.png?600|}}
 === Transaction Record Management Flow Diagram ===
-{{ :cm200v:diagram03.png?600 |}}
+{{:cash_sorting_machine:cm200v:diagram03.png?600|}}
@@ Line 577: / Line 565: @@
-NV recorder is an optional configuration for CM200V. The components should be purchased from GRG. The part numbers are as below:、、
+NV recorder is an optional configuration for CM200V. The components should be purchased from GRG. The part numbers are as below:\\
-  * S.0190541R       NV Recorder (SSD 128G)
+  * S.0190541R       NV Recorder (SSD 128G)\\
-  * YT4.853.5649     USB Cable (NV Control Board)
+  * YT4.853.5649     USB Cable (NV Control Board)\\
-{{:cash_sorting_machine:cm200v:image036.jpg?400|}}
+{{:cash_sorting_machine:cm200v:image036.jpg?400|}}\\
+To setup the recorder mode from RCC, please go to "Settings ->Functional Settings -> External Systems" and select "Recorder" button and click "OK".\\
-To setup the recorder mode from RCC, please go to "Settings ->Functional Settings -> External Systems" and select "Recorder" button and click "OK".
 {{:cash_sorting_machine:cm200v:image037.png?500|}}
@@ Line 593: / Line 578: @@
 Note: This function is available only when the template is support the OCR function.
 \\
-The scanned OCR images are stored in files with "*.FSN" extension which cannot be opened directly. A special tool is required to open these files. This mode requires the GRG authorized U-disk to be plugged in to the USB interface of CM200V, to transfer OCR images in real time while the machine processes the banknotes.
+The scanned OCR images are stored in files with "*.FSN" extension which cannot be opened directly. A special tool is required to open these files. This mode requires the GRG authorized U-disk to be plugged in to the USB interface of CM200V, to transfer OCR images in real time while the machine processes the banknotes.\\
-\\
+To setup the USB Disk mode from RCC, please go to "Settings ->Functional Settings -> External Systems" and select "USB Disk" button and click "OK".\\
-To setup the USB Disk mode from RCC, please go to "Settings ->Functional Settings -> External Systems" and select "USB Disk" button and click "OK".
 {{:cash_sorting_machine:cm200v:image038.png?500|}}
@@ Line 651: / Line 635: @@
 **1.  ** **USB connection and Driver installation**
-Refer to 《[[CM100V&CM200V USB Driver installation]]》 and 《[[CKS_How to Set “Disable Driver Signature Enforcement” on Your PC]]》
+Refer to 《[[CM100V&CM200V USB Driver installation]]》 and 《{{ :cash_sorting_machine:cm200v:cks_how_to_disable_drivers_signature_enforcement_in_win7_8_10.pdf |CKS_How to Set “Disable Driver Signature Enforcement” on Your PC}}》
 \\
 **2.  ** **Start up TOOLPLUS and Select**
@@ Line 796: / Line 780: @@
 **Judgment for Unqualified note:** Note can be judged as "Unqualified" note if it does not meet the requirement of ATM note and TLR note. By default note can be judged as "suspicious" note when at least one of its real-time parameters ( “Repair”, “Criteria 1”, “Criteria 2” ) is less than the same parameters that have been set beforehand; note can be judged as "undefined" note when at least one of its real-time parameters ( “Dog-ear”, “Hole”, “Mutilation” and “Tear” ) is less than the same parameters that have been set beforehand; and note can be judged as "unfit" note when at least one of its real-time parameters ( “Soil”, “Stain”, “De-ink” ) is less than the same parameters that have been set beforehand.
-For more details about parameters of sorting level, please refer to 《[[CM200V User Manual]]》\\
+For more details about parameters of sorting level, please refer to 《{{ :cash_sorting_machine:cm200v:cm200v_user_manual_v1.0.pdf |CM200V User Manual}}》\\
 Please select corresponding note code in drop-down box of sorting level before set and get their sorting level parameter.
@@ Line 1225: / Line 1209: @@
 **Jumper and Connector Locations**
 \\
-{{:cm200v:pc01.png?600|}}
+{{:cash_sorting_machine:cm200v:image062.png?600|}}
 \\
 Jumper and connector layout (front side)
@@ Line 1231: / Line 1215: @@
 \\
-{{:cm200v:pc02.png?600|}}
+{{:cash_sorting_machine:cm200v:image063.png?600|}}
 \\
 Jumper and connector layout (rear side)
@@ Line 1828: / Line 1812: @@
 *
 ===== Error Codes =====
-This section provides the descriptions of the CM200V error codes and their resolution methods.Please see below list for the error codes, their description and possible resolution.
+This section provides the descriptions of the CM200V error codes and their resolution methods.Please see the attachment for the error codes, their description and possible resolution.
+please refer to {{ :cash_sorting_machine:cm200v:cm200vcm400v_error_code_v1.0.xlsx |CM200VCM400V Error Code V1.0}}
-\\
-**Error Code List**
-| **error code value** | **hardware error code** | **Failure Description** | **Handling method** |
-| 19103 | 4672 | Sorting finished | Sorting finished |
-| 19140 | A400-A6FF | Sensor is dirty | Clean the corresponding sensor |
-| 19150 | 4610\\ 4620 | Note remaining in the note entrance slot | Take the notes away from entrance slot |
-| 19151 | 4611\\ 4621\\ 4639 | Note remaining in stacker 1 | Take the notes away from stacker1 |
-| 19152 | 4612\\ 4622\\ 463A | Note remaining in stacker 2 | Take the notes away from stacker2 |
-| 19153 | 4619\\ 4629 | Note remaining in reject slot | Take the notes away from reject slot |
-| 19154 | 4631\\ 4632\\ 4634\\ 4635\\ 4636\\ 4637 | Stackers are full | Take the notes   away from stackers |
-| 19155 | 4633\\ 4638 | Reject slot is full | Take the notes   away from reject slot |
-| 19156 | 4641 | Slot1 Notes Taken | Replace the notes from stacker 1 into the hopper |
-| 19157 | 4642 | Slot2 Notes Taken | Replace the notes from stacker 2 into the hopper |
-| 19158 | 4649\\ 464A | Note seperating failure in the cash in slot | Neaten  notes in the note entrance slot and reload them |
-| 19159 | 4651\\ 4652\\ 4653\\ 4654\\ 4659 | Unqualified note detected in the note entrance slot | No need for treatment |
-| 19160 | 4661 | Note transported to reject slot | Take the notes  away from reject slot |
-| 19161 | 4662 | No notes detected in the note entrance slot | Load notes in cash in slot |
-| 19162 | 4671 | Number of notes rejected exceeded the limit | Take the notes rejected and load new ones |
-| 19163 | 4681 | All stackers are unavailable (batch=0) | Reset the stacker batches |
-| 19164 | 4211 | NV cover is open | Restore all parts |
-| 19165 | 4212 | Thickness transport is opened (idle mode) |:::|
-| 19166 | 4213 | Main transport is opened (idle mode) |:::|
-| 19167 | 4B41-4B60 | Path remain notes | Clear notes |
-| 19168 | 4B61-4BFF | Notes Path Abnormal | Neaten  notes in the note entrance slot and reload them |
-| 19169 | 4C01 | Power down detected | Ignore |
-| 19190 | 464B | Notes Path Abnormal | Neaten  notes in the note entrance slot and reload them |
-| 19191 | 464C | Notes Path Abnormal | Neaten  notes in the note entrance slot and reload them |
-| 19192 | 4673 | Suspicious notes are detected | Take the suspicious notes away from the reject slot |
-| 19193 | 465A\\ 465B\\ 465C | Image Capture device is busy | Neaten  notes in the note entrance slot and reload them |
-| 19230 | 9101~911F | Command parameter error | Check parameters settings and reset them (if needed) |
-| 19290 | A000 ~ A2FF | Sensor  Failure | 1.Check corresponding sensor cable and prism\\ 2. Replace the sensor |
-| 19300 | \\ 9400~9AFF | NV internal error | reset NV |
-| 19301 | 9400-95FF | NV communication failed | Reset NV via USB cable |
-| 19305 | 9612 | Set note type error | Set correct note type |
-| 19311 | 9A01-9A3F | NV image recorder internal error | check the NV image recorder cable, and Reset NV. |
-| 19313 | 9A41-9A7F | RCP System internal error | Reset NV |
-| 19314 | 9A81-9ABF | U Disk Imaging System internal error. | Reset NV |
-| 19317 | 9AC1-9AFF | Image Capture Device error | Reset NV |
-| 19318 | 9732 | NV internal check failure | Reset NV |
-| 19319 | 9802\\ 9803 | NV denomination counter failure | Reset NV |
-| 19350 | 9300-93FF | Some parts of the machine  not in place | Restore all parts of the machine manually |
-| 19370 | A800-A8FF,\\ A900-A9FF | Motor failure | Check the corresponding motor and sensor |
-| 19371 | A901 | Note feeder motor failure | Check the corresponding motor |
-| 19372 | A902 | Main motor failure | Check the main motor and notes jam in the transport |
-| 19400 | AB00~BFFF | Other note jammed error | Clear the jammed notes, reset the machine |
-| 19460 | B001 - B1FF | Notes remained in the transport | 1.Clear the jammed notes; 2.reset the machine |
-| 19461 | B201 - B6FF | Notes transporting abnoramlly | Reset the machine |
-| 19462 | B801 - BAFF | Notes transporting error | 1.Clear the jammed notes; 2.Reset the machine |
-| 　 | 　 | 　 | 　 |
-| 19465 | AA00 | Notes remained in the cash in slot | 1.Clear the jammed notes; 2.reset the machine |
-| 19466 | AA01 | Notes remained in stacker 1 |:::|
-| 19467 | AA02 | Notes remained in stacker 2 |:::|
-| 19468 | AA09 | Notes remained in the reject slot |:::|
-| 19469 | AA11\\ AA12 | Notes remained are taken away | Reset the machine |
-| 19550 | 9B00 ~ 9CFF | Hardware internal error | Check main control  board |
-| 19551 | 9B61\\ 9B62 | Detected 24V power off | Exit applications and shut down the computer. |
-| 19570 | 9021 | Command unsupported | Ask for help from supplier |
-| 19571 | 9011\\ 9012\\ 9014\\ 9015 | Inappropriate command sent to machine | Reset the machine |
 \\
@@ Line 1924: / Line 1851: @@
 ===== Cable and Sensor Connection =====
-==== Motor Drive board (XS2) ====
+==== Motor drive board (XS2) ====
-| motor Drive board (XS2) | COLOR | pin | Signal | PIN | 　 | Board and cable |
+| Motor drive board (XS2) | Color | Pin | Signal | Pin | 　 | Board and cable |
 |{{ :cash_sorting_machine:cm200v:image134.png?80 |}}| red | 1 | +11V | 1 | {{ :cash_sorting_machine:cm200v:image135.png?50 |}} | main board XS1 |
 |:::| black | 2 | DGND | 2 |:::|:::|
@@ Line 1934: / Line 1861: @@
 |:::| black | 6 | DGND | 2 |:::|:::|
-===== Main Board cable =====
+===== Main board cable =====
 ==== XS3(MB->NV XS2) ====
-| Main Board (XS3) | COLOR | pin | Signal | PIN | NV board(XS2) |
+| Main board (XS3) | Color | Pin | Signal | Pin | NV board(XS2) |
 | {{ :cash_sorting_machine:cm200v:image138.png?100 |}} | black | 1 | GND | 1 | {{ :cash_sorting_machine:cm200v:image139.png?100 |}} |
 |:::| orange | 2 | NVTX | 2 |:::|
@@ Line 1960: / Line 1887: @@
 ==== XS4(MB->Sensor) ====
-| Main Board (XS4) | pin | Adapter pin | adapter | Sensor pin | Sensor | Signal |
+| Main board (XS4) | Pin | Adapter pin | Adapter | Sensor pin | Sensor | Signal |
 |{{ :cash_sorting_machine:cm200v:image140.png?150 |}} | 1 | 1 |{{ :cash_sorting_machine:cm200v:image141.png?100 |}} | 3 | RCS-S {{ :cash_sorting_machine:cm200v:image142.png?50 |}}  | ESVOL1 |
 |:::| 2 | 2 |:::| 1 |:::| DGND |
@@ Line 1984: / Line 1911: @@
 ==== XS5(MB-> Drive board XS5) ====
-| Main Board (XS5) | COLOR | pin | Signal | PIN | motor Drive board(XS5) |
+| Main board (XS5) | Color | Pin | Signal | Pin | Motor drive board(XS5) |
 | {{:cash_sorting_machine:cm200v:image146.png?150|}}| black | 1 | DGND | 1 | {{:cash_sorting_machine:cm200v:image146.png?150|}} |
 |:::| gray| 2 | MPb | 2 |:::|
@@ Line 2014: / Line 1941: @@
 ==== XS6(MB->Sensor) ====
-| Main Board (XS6) | COLOR | pin | Adapter pin | adapter | Sensor  pin | Sensor | Signal |
+| Main board (XS6) | Color | Pin | Adapter pin | Adapter | Sensor pin | Sensor | Signal |
 |  {{:cash_sorting_machine:cm200v:image148.png?150 |}} | red | 1 | 1 | NBJP01 {{:cash_sorting_machine:cm200v:image149.png?100|}}| 3 | TES1-S {{:cash_sorting_machine:cm200v:image150.png?50|}} | ESVOL6 |
 |:::| black | 2 | 2 |:::| 1 |:::| DGND |
@@ Line 2044: / Line 1971: @@
 ==== XS7 (MB->NVJP01) ====
-| Main Board (XS7) | COLOR | MB pin | NV pin | NV adapter | sensor pin | Sensor | Signal |
+| Main board (XS7) | Color | MB pin | NV pin | NV adapter | Sensor pin | Sensor | Signal |
 |{{:cash_sorting_machine:cm200v:image154.png?150|}} | red | 1 | 1 | NVJP01  {{:cash_sorting_machine:cm200v:image155.png?100|}} | 3 | NVTLS-S {{:cash_sorting_machine:cm200v:image156.png?50|}}| ESVOL13 |
 |:::| black | 2 | 2 |:::| 1 |:::| DGND |
@@ Line 2071: / Line 1998: @@
 ==== XS7 (MB->NVJP02) ====
-| Main Board (XS7) | COLOR | pin | adapter pin | adapter | sensor pin | Sensor | Signal |
+| Main board (XS7) | Color | Pin | Adapter pin | Adapter | Sensor pin | Sensor | Signal |
 |{{:cash_sorting_machine:cm200v:image157.png?150|}} | red | 1 | 　 | NVJP02 {{:cash_sorting_machine:cm200v:image158.png?100|}}  | 　 | 　 | 　 |
 |:::| black | 2 | 　 |:::| 　 | 　 | 　 |
@@ Line 2099: / Line 2026: @@
 ==== XS7 (MB->NVJP03) ====
-| Main Board (XS7) | COLOR | pin | Adapter pin | adapter | Sensor  pin | Sensor | Signal |
+| Main board (XS7) | Color | Pin | Adapter pin | Adapter | Sensor  pin | Sensor | Signal |
 |{{:cash_sorting_machine:cm200v:image157.png?100|}} | red | 1 | 　 | NVJP03 {{:cash_sorting_machine:cm200v:image158.png?80|}}  | 　 | 　 | 　 |
 |:::| black | 2 | 　 |:::| 　 | 　 | 　 |
@@ Line 2127: / Line 2054: @@
 ==== XS9(MB->NV 5XS2) ====
-| Main Board (XS9) | COLOR | pin | Signal | PIN | NV board(5XS2) |
+| Main board (XS9) | Color | Pin | Signal | Pin | NV board(5XS2) |
 | {{ :cash_sorting_machine:cm200v:image163.png?nolink&100 | }} | black | 1 | DGND | 5 | {{ :cash_sorting_machine:cm200v:image164.png?nolink&60 |}} |
 |:::| gray | 2 | NVsig1 | 3 |:::|
@@ Line 2141: / Line 2068: @@
 ==== XS8(MB->Sensor) ====
-| Main Board (XS8) | COLOR | pin | Signal | PIN | RES |
+| Main board (XS8) | Color | Pin | Signal | Pin | Res |
 |{{ :cash_sorting_machine:cm200v:image165.png?nolink&100 |}} | 　 | 1 | 　 | 　 | {{ :cash_sorting_machine:cm200v:image166.png?nolink&100 |}} |
 |:::| 　 | 2 | 　 | 　 |:::|
@@ Line 2167: / Line 2094: @@
 ==== XS12(MB-> Lower display board XS1) ====
-| Main Board (XS12) | COLOR | pin | Signal | PIN | lower digital display board(XS1) |
+| Main board (XS12) | Color | Pin | Signal | Pin | Lower digital display board(XS1) |
 |{{ :cash_sorting_machine:cm200v:image167.png?nolink&100 |}}  | red | 1 | +5v | 1 | {{ :cash_sorting_machine:cm200v:image168.png?nolink&100 |}} |
 |:::| black | 2 | DGND | 2 |:::|
@@ Line 2177: / Line 2104: @@
 ==== XS13(MB-> Upper display board XS1) ====
-| Main Board (XS13) | COLOR | pin | Signal | PIN | upper digital display board(XS1) |
+| Main board (XS13) | Color | Pin | Signal | Pin | Upper digital display board(XS1) |
 |{{ :cash_sorting_machine:cm200v:image167.png?nolink&100 |}}  | red | 1 | +5v | 1 | {{ :cash_sorting_machine:cm200v:image168.png?nolink&100 |}} |
 |:::| black | 2 | DGND | 2 |:::|
@@ Line 2189: / Line 2116: @@
 ==== XS14(MB->Four key board XS4) ====
-| Main Board (XS14) | COLOR | pin | Signal | PIN | four keys board(xs4) |
+| Main board (XS14) | Color | Pin | Signal | Pin | Four keys board(xs4) |
 |{{ :cash_sorting_machine:cm200v:image169.png?nolink&80 |}}  | white | 1 | LED1OUT | 3 |{{ :cash_sorting_machine:cm200v:image170.png?nolink&80 |}}  |
 |:::| 　 | 2 | 　 | 　 |:::|
@@ Line 2197: / Line 2124: @@
 ==== XS15(MB->Power control board XS4) ====
-| Main Board (XS15) | COLOR | pin | Signal | PIN | power control board(XS4) |
+| Main board (XS15) | Color | Pin | Signal | Pin | Power control board(XS4) |
 |{{ :cash_sorting_machine:cm200v:image170.png?nolink&80 |}} | gray | 1 | USENOUT1 | 1 |{{ :cash_sorting_machine:cm200v:image169.png?nolink&80 |}} |
 |:::| white | 2 | DGND | 2 |:::|
@@ Line 2207: / Line 2134: @@
 ==== NV Board cable 5XS1->USB board XS2 ====
-| NV board(5XS1) | COLOR | pin | Signal | PIN | USB board(XS2) |
+| NV board(5XS1) | Color | Pin | Signal | Pin | USB board(XS2) |
 | {{ :cash_sorting_machine:cm200v:image171.png?80 |}}| red | 1 | +5V | 1 |{{ :cash_sorting_machine:cm200v:image172.png?80 |}} |
 |:::| white | 2 | D- | 2 |:::|
@@ Line 2219: / Line 2146: @@
 ==== CN4(IPC->Four key board XS1 and USB board XS6) ====
-| IPC board (CN 4) | COLOR | pin | Signal | pin | POWER SUPPLY |
+| IPC board (CN 4) | Color | Pin | Signal | Pin | Power Supply |
 |{{ :cash_sorting_machine:cm200v:image173.png?nolink&100 |}} | gray | 1 | GPIO5 | 7 | four keys board\\ (xs1)\\ {{:cash_sorting_machine:cm200v:image174.png?nolink&60|}}   \\   \\ USB board\\ (xs6)\\  {{:cash_sorting_machine:cm200v:image175.png?nolink&60|}}|
 |:::| red | 2 | +5V | 1 |:::|
@@ Line 2235: / Line 2162: @@
 ==== CN15(IPC->MB board XS11) ====
-| IPC Board (CN15) | COLOR | pin | Signal | PIN | Main board  (xs11)　 |
+| IPC board (CN15) | Color | Pin | Signal | Pin | Main board  (xs11)　 |
 | {{ :cash_sorting_machine:cm200v:image173.png?nolink&100 |}}| red | 1 | 　 | 　 |  {{ :cash_sorting_machine:cm200v:image171.png?nolink&100 | }} |
 |:::| red | 2 | +5V | 1 |:::|
@@ Line 2251: / Line 2178: @@
 ==== CN24(IPC->USB board XS3) ====
-| IPC board (CN24) | COLOR | pin | Signal | pin | USB board(XS3) |
+| IPC board (CN24) | Color | Pin | Signal | Pin | USB board(XS3) |
 |  {{ :cash_sorting_machine:cm200v:image176.png?nolink&100 |}}| 　 | 　 | 　 | 1 |  {{ :cash_sorting_machine:cm200v:image174.png?nolink&100 |}}|
 |:::| 　 | 　 | 　 | 2 |:::|
@@ Line 2267: / Line 2194: @@
 ==== Four keys board XS2-> Two keys board XS6 ====
-| four keys board (XS2) | COLOR | pin | Signal | pin | two keys board(XS6) |
+| Four keys board (XS2) | Color | Pin | Signal | Pin | Two keys board(XS6) |
 |{{ :cash_sorting_machine:cm200v:image171.png?80 |}} | red | 1 | +5v | 1 |{{ :cash_sorting_machine:cm200v:image170.png?80 |}} |
 |:::| white | 2 | GPIO4 | 2 |:::|
@@ Line 2337: / Line 2264: @@
 | Pin Sequence | NC  9 8 7 6 ||   | 5 4 3 2 1 NC ||
 |Picture|{{:cash_sorting_machine:cm200v:image178.jpg?nolink&400|}}|||||
+\\
+====== Appendix-2 Training Prerequisites ======
+**Required General Tools**
+| **No.** | **Description** | **Qty.** |
+| 1 | Phillips Screwdriver Size 107/200mm (+) | 1 |
+| 2 | Phillips Screwdriver Size 102/150mm (+) | 1 |
+| 3 | Phillips Screwdriver Size 101/100mm (+) | 1 |
+| 4 | Flat Screwdriver Size 107/200mm (-) | 1 |
+| 5 | Flat Screwdriver Size 102/150mm (-) | 1 |
+| 6 | Flat Screwdriver Size 101/100mm (-) | 1 |
+| 8 | Short Screwdriver Size 104X1-1/2 | 1 |
+| 9 | Sharp Nose Pliers (SM-18) | 1 |
+| 10 | Cutting Pliers (SM-20) | 1 |
+| 11 | Locking Pliers (Vise-grip) | 1 |
+| 12 | 40W Electronic Iron (KS-40) | 1 |
+| 13 | Suction Pump | 1 |
+| 14 | Soldering Tin | 1 |
+| 15 | ESD Protection Ring | 1 |
+| 16 | Torch Light | 1 |
+| 17 | Knife(LC-100) | 1 |
+| 18 | Flat file | 1 |
+| 19 | Mini Open End Wrench Set (Combination Wrench) | 1 |
+| 20 | Brush | 1 |
+| 21 | Adhesive Tape | 1 |
+| 22 | Tweezers | 1 |
+| 23 | Allen Head Set (Size 1.5mm~6.0mm) | 1 |
+| 24 | Digital Multi-meter | 1 |
+| 25 | socket wrench set | 1 |
+| 26 | Cable Ties different Sizes | 1 |
+| 27 | Magnetic stick bend of absorption   | 1 |
+| 28 | Magnet Generator | 1 |
+| 26 | Toolbox | 1 |
+====== Appendix-3 User Feedback Form ======
+**Title****：****Hardware Engineer Level 1 Training Manual—CM200V (Version: 1.1)**
+GRG Banking Equipment Co., Ltd welcomes your feedback on this publication. Your comments will be of great value in helping us to improve our products.
+Circle the numbers below that best represent your options of this publication.
+| Ease of use | 5    4    3    2    1    0 | 5 = Excellent\\ 4 = Good\\ 3 = Adequate\\ 2 = Fair\\ 1 = Poor\\ 0 = Not Applicable |
+| Accuracy | 5    4    3    2    1    0 |:::|
+| Clarity | 5    4    3    2    1    0 |:::|
+| Completeness | 5    4    3    2    1    0 |:::|
+| Organization | 5    4    3    2    1    0 |:::|
+| Appearance | 5    4    3    2    1    0 |:::|
+| Illustrations | 5    4    3    2    1    0 |:::|
+| Examples | 5    4    3    2    1    0 |:::|
+| Overall satisfaction | 5    4    3    2    1    0 |:::|
+Choose the items you feel we will improve this publication.
+| Improve the table of contents | Add more/better quick reference aids |
+| Improve the general description | Add more examples |
+| Improve the organization | Add more illustrations |
+| Make it less technical | Add more technical detail |
+| Make it more brief | Add more step-by-step procedures |
+Write any additional comments you have below (If necessary, add additional sheets.)
+__                                                                     __
+__                                                                      __
+Thank you for your evaluation of this publication. Please provide us the information to contact you as below.
+Name: __                             __  Tel: __                                __  Fax: __                               __
+Company: __                                                                                __
+Address: __                                                                                  __
+\\
+\\
+\\ ** **
+** **
+** **
+** **
+====== Comments and Suggestions ======
+To help GRGBanking to maintain the quality of their publications, send your valuable comments and suggestions on the accuracy, clarity, usability, navigation, organization and value of this book.
+Address Correspondence to:
+<WRAP round box >
+Copyright By **GRG Banking Equipment Co., Ltd.**
+\\
+Address : 9 Kelin Road, Science City,Luogang District, Guangzhou,China, Postcode: 510663\\
+Tel : +86(0)20-82189249, 82188301 \\
+Fax : +86 (0)20-82187163\\
+E-mail : tech_support@grgbanking.com\\
+Web : http://www.grgbanking.com\\
+All Rights Reserved
+</WRAP>

Close

Welcome
Products

[Financial Self-service Solution]
H22N/NL
H22V/VL
H34N/NL
H68N/NL
H68V/VL
I21
I58

[Retail Solution]
P2600
P2800
P2800N
P5500L
P5800
TCR71

[Branch Automation]
I60X
I66
i30c
i64A
VTM Types Intro.

[Cash Sorting Machine]
CM100V
CM200V
CM200VN
CM300N
CM400
CM400N
CM Tools

[Software Solution]
YDC-WOSA
eCAT
CATlyst
XFS SP
iService Solution

[OEM Module]
CDM8240
CDM8240N
CAM8340
CAM8350
CRM9250
CRM9250N
CRM9250T
CRM9000 Series
CA-10
BA-08
BR-15N

[Error Code]
ATM Series Error Code
Cash Sorting Machine
Banknote Processing Line Error Code
XFS Error Code

[Generic Modules]
ATM Generic Devices
VTM Generic Devices

[GRG Internal Only]
内部文档