Differences

This shows you the differences between two versions of the page.

--- cash_sorting_machine:cm200v:cm200v [2017/04/27 02:25]
root [PC Main Board Layout]
+++ cash_sorting_machine:cm200v:cm200v [2021/01/07 08:53] (current)
angelo_chen [2. RotoCash Security (SECOne)]
@@ Line 1: / Line 1: @@
+{{:atm:h22:logo2.png?200|}}\\
 ===== Hardware Engineer CM200V Level 1 Training Manual =====
@@ Line 6: / Line 8: @@
-<WRAP round box>
 | **Doc. No.    ** | **YT-WCSC(O)** |
 | **Version** | **1.1** |
 | **Issuing date** |**2016** |
-</WRAP>
@@ Line 30: / Line 32: @@
 \\
-<WRAP round box >
 Copyright By **GRG Banking Equipment Co., Ltd.**
 \\
@@ Line 39: / Line 41: @@
 Web : http://www.grgbanking.com\\
 All Rights Reserved
-</WRAP>
@@ Line 45: / Line 47: @@
 **Revision History**
-<WRAP center round box >
 | **Version** | ** Issue Date** | **Remark** | **Participant** |
@@ Line 51: / Line 53: @@
 | 1.1 | 2016-12 | Add a new menu Add circuit diagram Add cable and sensor connection Add RCC folder expiation Re-name of cable-sensor connection | Hank |
-</WRAP>
@@ Line 66: / Line 68: @@
 ==== General Safety Precautions ====
-To ensure the safe operation of the machine, please carefully read the notes on safety provided below as well as the contents of this manual. <color #ed1c24>**GRG Banking will not bear any responsibilities for the damage or injuries**</color> arising from the use of the machine that is not in accordance with the notes and the contents provided below.
+To ensure the safe operation of the machine, please carefully read the notes on safety provided below as well as the contents of this manual.**GRG Banking will not bear any responsibilities for the damage or injuries** arising from the use of the machine that is not in accordance with the notes and the contents provided below.
 **Notes on operation safety**
@@ Line 350: / Line 352: @@
   - RotoCash Security (SECOne):GRG Security Software for CM200V
+*If the machine had installed RCC, please uninstall the RCC and delete the RCC folder first.
 ==== 1. RotoCash Controller (RCC) ====
   - Application and Folder Introduction
@@ Line 488: / Line 490: @@
 **a) Regedit Checking:** Open "Regedit" and check if the item "HKEY_LOCAL_MACHINE\SYSTEM\SECONE\Config" exists and its "VersionInfo" value is "V1.0.0b2".
-**b) Task Manager checking:** Open the "Task Manager" and check if the following two processes exist:
+**b) Task Manager checking:** Open the "Task Manager" and check if the following two processes exist:\\
+Client Service Process: Autorun.exe \\
-Autorun . exe                  Client Service Process\\
+Service Monitoring Process: ProcServiceMon.exe \\
-ProcServiceMon . exe            Service Monitoring Process\\
-Uninstallation
+**Uninstallation**\\
 There are two ways to uninstall the RotoCash Security software.\\
 a) Using "Add/Remove Programs" from the 'Control Panel"\\
@@ Line 505: / Line 505: @@
 Please be sure to restart the machine after uninstalling RotoCash Security Software.
+*Delete the RCC folder completely.
 **b) Using RotoCash Security uninstallation component**
@@ Line 541: / Line 541: @@
 === Daily Sorting Operation Flow Diagram ===
-{{ :cm200v:diagram01.png?600 |}}
+{{:cash_sorting_machine:cm200v:diagram01.png?600|}}
 === Functional Setting Flow Diagram ===
-{{ :cm200v:diagram02.png?600 |}}
+{{:cash_sorting_machine:cm200v:diagram02.png?600|}}
 === Transaction Record Management Flow Diagram ===
-{{ :cm200v:diagram03.png?600 |}}
+{{:cash_sorting_machine:cm200v:diagram03.png?600|}}
@@ Line 572: / Line 565: @@
-NV recorder is an optional configuration for CM200V. The components should be purchased from GRG. The part numbers are as below:、、
+NV recorder is an optional configuration for CM200V. The components should be purchased from GRG. The part numbers are as below:\\
-  * S.0190541R       NV Recorder (SSD 128G)
+  * S.0190541R       NV Recorder (SSD 128G)\\
-  * YT4.853.5649     USB Cable (NV Control Board)
+  * YT4.853.5649     USB Cable (NV Control Board)\\
-{{:cash_sorting_machine:cm200v:image036.jpg?400|}}
+{{:cash_sorting_machine:cm200v:image036.jpg?400|}}\\
+To setup the recorder mode from RCC, please go to "Settings ->Functional Settings -> External Systems" and select "Recorder" button and click "OK".\\
-To setup the recorder mode from RCC, please go to "Settings ->Functional Settings -> External Systems" and select "Recorder" button and click "OK".
 {{:cash_sorting_machine:cm200v:image037.png?500|}}
@@ Line 588: / Line 578: @@
 Note: This function is available only when the template is support the OCR function.
 \\
-The scanned OCR images are stored in files with "*.FSN" extension which cannot be opened directly. A special tool is required to open these files. This mode requires the GRG authorized U-disk to be plugged in to the USB interface of CM200V, to transfer OCR images in real time while the machine processes the banknotes.
+The scanned OCR images are stored in files with "*.FSN" extension which cannot be opened directly. A special tool is required to open these files. This mode requires the GRG authorized U-disk to be plugged in to the USB interface of CM200V, to transfer OCR images in real time while the machine processes the banknotes.\\
-\\
+To setup the USB Disk mode from RCC, please go to "Settings ->Functional Settings -> External Systems" and select "USB Disk" button and click "OK".\\
-To setup the USB Disk mode from RCC, please go to "Settings ->Functional Settings -> External Systems" and select "USB Disk" button and click "OK".
 {{:cash_sorting_machine:cm200v:image038.png?500|}}
@@ Line 1823: / Line 1812: @@
 *
 ===== Error Codes =====
-This section provides the descriptions of the CM200V error codes and their resolution methods.Please see below list for the error codes, their description and possible resolution.
+This section provides the descriptions of the CM200V error codes and their resolution methods.Please see the attachment for the error codes, their description and possible resolution.
+please refer to {{ :cash_sorting_machine:cm200v:cm200vcm400v_error_code_v1.0.xlsx |CM200VCM400V Error Code V1.0}}
-\\
-**Error Code List**
-| **error code value** | **hardware error code** | **Failure Description** | **Handling method** |
-| 19103 | 4672 | Sorting finished | Sorting finished |
-| 19140 | A400-A6FF | Sensor is dirty | Clean the corresponding sensor |
-| 19150 | 4610\\ 4620 | Note remaining in the note entrance slot | Take the notes away from entrance slot |
-| 19151 | 4611\\ 4621\\ 4639 | Note remaining in stacker 1 | Take the notes away from stacker1 |
-| 19152 | 4612\\ 4622\\ 463A | Note remaining in stacker 2 | Take the notes away from stacker2 |
-| 19153 | 4619\\ 4629 | Note remaining in reject slot | Take the notes away from reject slot |
-| 19154 | 4631\\ 4632\\ 4634\\ 4635\\ 4636\\ 4637 | Stackers are full | Take the notes   away from stackers |
-| 19155 | 4633\\ 4638 | Reject slot is full | Take the notes   away from reject slot |
-| 19156 | 4641 | Slot1 Notes Taken | Replace the notes from stacker 1 into the hopper |
-| 19157 | 4642 | Slot2 Notes Taken | Replace the notes from stacker 2 into the hopper |
-| 19158 | 4649\\ 464A | Note seperating failure in the cash in slot | Neaten  notes in the note entrance slot and reload them |
-| 19159 | 4651\\ 4652\\ 4653\\ 4654\\ 4659 | Unqualified note detected in the note entrance slot | No need for treatment |
-| 19160 | 4661 | Note transported to reject slot | Take the notes  away from reject slot |
-| 19161 | 4662 | No notes detected in the note entrance slot | Load notes in cash in slot |
-| 19162 | 4671 | Number of notes rejected exceeded the limit | Take the notes rejected and load new ones |
-| 19163 | 4681 | All stackers are unavailable (batch=0) | Reset the stacker batches |
-| 19164 | 4211 | NV cover is open | Restore all parts |
-| 19165 | 4212 | Thickness transport is opened (idle mode) |:::|
-| 19166 | 4213 | Main transport is opened (idle mode) |:::|
-| 19167 | 4B41-4B60 | Path remain notes | Clear notes |
-| 19168 | 4B61-4BFF | Notes Path Abnormal | Neaten  notes in the note entrance slot and reload them |
-| 19169 | 4C01 | Power down detected | Ignore |
-| 19190 | 464B | Notes Path Abnormal | Neaten  notes in the note entrance slot and reload them |
-| 19191 | 464C | Notes Path Abnormal | Neaten  notes in the note entrance slot and reload them |
-| 19192 | 4673 | Suspicious notes are detected | Take the suspicious notes away from the reject slot |
-| 19193 | 465A\\ 465B\\ 465C | Image Capture device is busy | Neaten  notes in the note entrance slot and reload them |
-| 19230 | 9101~911F | Command parameter error | Check parameters settings and reset them (if needed) |
-| 19290 | A000 ~ A2FF | Sensor  Failure | 1.Check corresponding sensor cable and prism\\ 2. Replace the sensor |
-| 19300 | \\ 9400~9AFF | NV internal error | reset NV |
-| 19301 | 9400-95FF | NV communication failed | Reset NV via USB cable |
-| 19305 | 9612 | Set note type error | Set correct note type |
-| 19311 | 9A01-9A3F | NV image recorder internal error | check the NV image recorder cable, and Reset NV. |
-| 19313 | 9A41-9A7F | RCP System internal error | Reset NV |
-| 19314 | 9A81-9ABF | U Disk Imaging System internal error. | Reset NV |
-| 19317 | 9AC1-9AFF | Image Capture Device error | Reset NV |
-| 19318 | 9732 | NV internal check failure | Reset NV |
-| 19319 | 9802\\ 9803 | NV denomination counter failure | Reset NV |
-| 19350 | 9300-93FF | Some parts of the machine  not in place | Restore all parts of the machine manually |
-| 19370 | A800-A8FF,\\ A900-A9FF | Motor failure | Check the corresponding motor and sensor |
-| 19371 | A901 | Note feeder motor failure | Check the corresponding motor |
-| 19372 | A902 | Main motor failure | Check the main motor and notes jam in the transport |
-| 19400 | AB00~BFFF | Other note jammed error | Clear the jammed notes, reset the machine |
-| 19460 | B001 - B1FF | Notes remained in the transport | 1.Clear the jammed notes; 2.reset the machine |
-| 19461 | B201 - B6FF | Notes transporting abnoramlly | Reset the machine |
-| 19462 | B801 - BAFF | Notes transporting error | 1.Clear the jammed notes; 2.Reset the machine |
-| 　 | 　 | 　 | 　 |
-| 19465 | AA00 | Notes remained in the cash in slot | 1.Clear the jammed notes; 2.reset the machine |
-| 19466 | AA01 | Notes remained in stacker 1 |:::|
-| 19467 | AA02 | Notes remained in stacker 2 |:::|
-| 19468 | AA09 | Notes remained in the reject slot |:::|
-| 19469 | AA11\\ AA12 | Notes remained are taken away | Reset the machine |
-| 19550 | 9B00 ~ 9CFF | Hardware internal error | Check main control  board |
-| 19551 | 9B61\\ 9B62 | Detected 24V power off | Exit applications and shut down the computer. |
-| 19570 | 9021 | Command unsupported | Ask for help from supplier |
-| 19571 | 9011\\ 9012\\ 9014\\ 9015 | Inappropriate command sent to machine | Reset the machine |
 \\
@@ Line 1919: / Line 1851: @@
 ===== Cable and Sensor Connection =====
-==== Motor Drive board (XS2) ====
+==== Motor drive board (XS2) ====
-| motor Drive board (XS2) | COLOR | pin | Signal | PIN | 　 | Board and cable |
+| Motor drive board (XS2) | Color | Pin | Signal | Pin | 　 | Board and cable |
 |{{ :cash_sorting_machine:cm200v:image134.png?80 |}}| red | 1 | +11V | 1 | {{ :cash_sorting_machine:cm200v:image135.png?50 |}} | main board XS1 |
 |:::| black | 2 | DGND | 2 |:::|:::|
@@ Line 1929: / Line 1861: @@
 |:::| black | 6 | DGND | 2 |:::|:::|
-===== Main Board cable =====
+===== Main board cable =====
 ==== XS3(MB->NV XS2) ====
-| Main Board (XS3) | COLOR | pin | Signal | PIN | NV board(XS2) |
+| Main board (XS3) | Color | Pin | Signal | Pin | NV board(XS2) |
 | {{ :cash_sorting_machine:cm200v:image138.png?100 |}} | black | 1 | GND | 1 | {{ :cash_sorting_machine:cm200v:image139.png?100 |}} |
 |:::| orange | 2 | NVTX | 2 |:::|
@@ Line 1955: / Line 1887: @@
 ==== XS4(MB->Sensor) ====
-| Main Board (XS4) | pin | Adapter pin | adapter | Sensor pin | Sensor | Signal |
+| Main board (XS4) | Pin | Adapter pin | Adapter | Sensor pin | Sensor | Signal |
 |{{ :cash_sorting_machine:cm200v:image140.png?150 |}} | 1 | 1 |{{ :cash_sorting_machine:cm200v:image141.png?100 |}} | 3 | RCS-S {{ :cash_sorting_machine:cm200v:image142.png?50 |}}  | ESVOL1 |
 |:::| 2 | 2 |:::| 1 |:::| DGND |
@@ Line 1979: / Line 1911: @@
 ==== XS5(MB-> Drive board XS5) ====
-| Main Board (XS5) | COLOR | pin | Signal | PIN | motor Drive board(XS5) |
+| Main board (XS5) | Color | Pin | Signal | Pin | Motor drive board(XS5) |
 | {{:cash_sorting_machine:cm200v:image146.png?150|}}| black | 1 | DGND | 1 | {{:cash_sorting_machine:cm200v:image146.png?150|}} |
 |:::| gray| 2 | MPb | 2 |:::|
@@ Line 2009: / Line 1941: @@
 ==== XS6(MB->Sensor) ====
-| Main Board (XS6) | COLOR | pin | Adapter pin | adapter | Sensor  pin | Sensor | Signal |
+| Main board (XS6) | Color | Pin | Adapter pin | Adapter | Sensor pin | Sensor | Signal |
 |  {{:cash_sorting_machine:cm200v:image148.png?150 |}} | red | 1 | 1 | NBJP01 {{:cash_sorting_machine:cm200v:image149.png?100|}}| 3 | TES1-S {{:cash_sorting_machine:cm200v:image150.png?50|}} | ESVOL6 |
 |:::| black | 2 | 2 |:::| 1 |:::| DGND |
@@ Line 2039: / Line 1971: @@
 ==== XS7 (MB->NVJP01) ====
-| Main Board (XS7) | COLOR | MB pin | NV pin | NV adapter | sensor pin | Sensor | Signal |
+| Main board (XS7) | Color | MB pin | NV pin | NV adapter | Sensor pin | Sensor | Signal |
 |{{:cash_sorting_machine:cm200v:image154.png?150|}} | red | 1 | 1 | NVJP01  {{:cash_sorting_machine:cm200v:image155.png?100|}} | 3 | NVTLS-S {{:cash_sorting_machine:cm200v:image156.png?50|}}| ESVOL13 |
 |:::| black | 2 | 2 |:::| 1 |:::| DGND |
@@ Line 2066: / Line 1998: @@
 ==== XS7 (MB->NVJP02) ====
-| Main Board (XS7) | COLOR | pin | adapter pin | adapter | sensor pin | Sensor | Signal |
+| Main board (XS7) | Color | Pin | Adapter pin | Adapter | Sensor pin | Sensor | Signal |
 |{{:cash_sorting_machine:cm200v:image157.png?150|}} | red | 1 | 　 | NVJP02 {{:cash_sorting_machine:cm200v:image158.png?100|}}  | 　 | 　 | 　 |
 |:::| black | 2 | 　 |:::| 　 | 　 | 　 |
@@ Line 2094: / Line 2026: @@
 ==== XS7 (MB->NVJP03) ====
-| Main Board (XS7) | COLOR | pin | Adapter pin | adapter | Sensor  pin | Sensor | Signal |
+| Main board (XS7) | Color | Pin | Adapter pin | Adapter | Sensor  pin | Sensor | Signal |
 |{{:cash_sorting_machine:cm200v:image157.png?100|}} | red | 1 | 　 | NVJP03 {{:cash_sorting_machine:cm200v:image158.png?80|}}  | 　 | 　 | 　 |
 |:::| black | 2 | 　 |:::| 　 | 　 | 　 |
@@ Line 2122: / Line 2054: @@
 ==== XS9(MB->NV 5XS2) ====
-| Main Board (XS9) | COLOR | pin | Signal | PIN | NV board(5XS2) |
+| Main board (XS9) | Color | Pin | Signal | Pin | NV board(5XS2) |
 | {{ :cash_sorting_machine:cm200v:image163.png?nolink&100 | }} | black | 1 | DGND | 5 | {{ :cash_sorting_machine:cm200v:image164.png?nolink&60 |}} |
 |:::| gray | 2 | NVsig1 | 3 |:::|
@@ Line 2136: / Line 2068: @@
 ==== XS8(MB->Sensor) ====
-| Main Board (XS8) | COLOR | pin | Signal | PIN | RES |
+| Main board (XS8) | Color | Pin | Signal | Pin | Res |
 |{{ :cash_sorting_machine:cm200v:image165.png?nolink&100 |}} | 　 | 1 | 　 | 　 | {{ :cash_sorting_machine:cm200v:image166.png?nolink&100 |}} |
 |:::| 　 | 2 | 　 | 　 |:::|
@@ Line 2162: / Line 2094: @@
 ==== XS12(MB-> Lower display board XS1) ====
-| Main Board (XS12) | COLOR | pin | Signal | PIN | lower digital display board(XS1) |
+| Main board (XS12) | Color | Pin | Signal | Pin | Lower digital display board(XS1) |
 |{{ :cash_sorting_machine:cm200v:image167.png?nolink&100 |}}  | red | 1 | +5v | 1 | {{ :cash_sorting_machine:cm200v:image168.png?nolink&100 |}} |
 |:::| black | 2 | DGND | 2 |:::|
@@ Line 2172: / Line 2104: @@
 ==== XS13(MB-> Upper display board XS1) ====
-| Main Board (XS13) | COLOR | pin | Signal | PIN | upper digital display board(XS1) |
+| Main board (XS13) | Color | Pin | Signal | Pin | Upper digital display board(XS1) |
 |{{ :cash_sorting_machine:cm200v:image167.png?nolink&100 |}}  | red | 1 | +5v | 1 | {{ :cash_sorting_machine:cm200v:image168.png?nolink&100 |}} |
 |:::| black | 2 | DGND | 2 |:::|
@@ Line 2184: / Line 2116: @@
 ==== XS14(MB->Four key board XS4) ====
-| Main Board (XS14) | COLOR | pin | Signal | PIN | four keys board(xs4) |
+| Main board (XS14) | Color | Pin | Signal | Pin | Four keys board(xs4) |
 |{{ :cash_sorting_machine:cm200v:image169.png?nolink&80 |}}  | white | 1 | LED1OUT | 3 |{{ :cash_sorting_machine:cm200v:image170.png?nolink&80 |}}  |
 |:::| 　 | 2 | 　 | 　 |:::|
@@ Line 2192: / Line 2124: @@
 ==== XS15(MB->Power control board XS4) ====
-| Main Board (XS15) | COLOR | pin | Signal | PIN | power control board(XS4) |
+| Main board (XS15) | Color | Pin | Signal | Pin | Power control board(XS4) |
 |{{ :cash_sorting_machine:cm200v:image170.png?nolink&80 |}} | gray | 1 | USENOUT1 | 1 |{{ :cash_sorting_machine:cm200v:image169.png?nolink&80 |}} |
 |:::| white | 2 | DGND | 2 |:::|
@@ Line 2202: / Line 2134: @@
 ==== NV Board cable 5XS1->USB board XS2 ====
-| NV board(5XS1) | COLOR | pin | Signal | PIN | USB board(XS2) |
+| NV board(5XS1) | Color | Pin | Signal | Pin | USB board(XS2) |
 | {{ :cash_sorting_machine:cm200v:image171.png?80 |}}| red | 1 | +5V | 1 |{{ :cash_sorting_machine:cm200v:image172.png?80 |}} |
 |:::| white | 2 | D- | 2 |:::|
@@ Line 2214: / Line 2146: @@
 ==== CN4(IPC->Four key board XS1 and USB board XS6) ====
-| IPC board (CN 4) | COLOR | pin | Signal | pin | POWER SUPPLY |
+| IPC board (CN 4) | Color | Pin | Signal | Pin | Power Supply |
 |{{ :cash_sorting_machine:cm200v:image173.png?nolink&100 |}} | gray | 1 | GPIO5 | 7 | four keys board\\ (xs1)\\ {{:cash_sorting_machine:cm200v:image174.png?nolink&60|}}   \\   \\ USB board\\ (xs6)\\  {{:cash_sorting_machine:cm200v:image175.png?nolink&60|}}|
 |:::| red | 2 | +5V | 1 |:::|
@@ Line 2230: / Line 2162: @@
 ==== CN15(IPC->MB board XS11) ====
-| IPC Board (CN15) | COLOR | pin | Signal | PIN | Main board  (xs11)　 |
+| IPC board (CN15) | Color | Pin | Signal | Pin | Main board  (xs11)　 |
 | {{ :cash_sorting_machine:cm200v:image173.png?nolink&100 |}}| red | 1 | 　 | 　 |  {{ :cash_sorting_machine:cm200v:image171.png?nolink&100 | }} |
 |:::| red | 2 | +5V | 1 |:::|
@@ Line 2246: / Line 2178: @@
 ==== CN24(IPC->USB board XS3) ====
-| IPC board (CN24) | COLOR | pin | Signal | pin | USB board(XS3) |
+| IPC board (CN24) | Color | Pin | Signal | Pin | USB board(XS3) |
 |  {{ :cash_sorting_machine:cm200v:image176.png?nolink&100 |}}| 　 | 　 | 　 | 1 |  {{ :cash_sorting_machine:cm200v:image174.png?nolink&100 |}}|
 |:::| 　 | 　 | 　 | 2 |:::|
@@ Line 2262: / Line 2194: @@
 ==== Four keys board XS2-> Two keys board XS6 ====
-| four keys board (XS2) | COLOR | pin | Signal | pin | two keys board(XS6) |
+| Four keys board (XS2) | Color | Pin | Signal | Pin | Two keys board(XS6) |
 |{{ :cash_sorting_machine:cm200v:image171.png?80 |}} | red | 1 | +5v | 1 |{{ :cash_sorting_machine:cm200v:image170.png?80 |}} |
 |:::| white | 2 | GPIO4 | 2 |:::|
@@ Line 2373: / Line 2305: @@
 ====== Appendix-3 User Feedback Form ======
-**Title****：****Hardware Engineer Level 1 Training Manual—CM200V (Version: 1.0)**
+**Title****：****Hardware Engineer Level 1 Training Manual—CM200V (Version: 1.1)**
 GRG Banking Equipment Co., Ltd welcomes your feedback on this publication. Your comments will be of great value in helping us to improve our products.

Close

Welcome
Products

[Financial Self-service Solution]
H22N/NL
H22V/VL
H34N/NL
H68N/NL
H68V/VL
I21
I58

[Retail Solution]
P2600
P2800
P2800N
P5500L
P5800
TCR71

[Branch Automation]
I60X
I66
i30c
i64A
VTM Types Intro.

[Cash Sorting Machine]
CM100V
CM200V
CM200VN
CM300N
CM400
CM400N
CM Tools

[Software Solution]
YDC-WOSA
eCAT
CATlyst
XFS SP
iService Solution

[OEM Module]
CDM8240
CDM8240N
CAM8340
CAM8350
CRM9250
CRM9250N
CRM9250T
CRM9000 Series
CA-10
BA-08
BR-15N

[Error Code]
ATM Series Error Code
Cash Sorting Machine
Banknote Processing Line Error Code
XFS Error Code

[Generic Modules]
ATM Generic Devices
VTM Generic Devices

[GRG Internal Only]
内部文档